Latest!

OPPO Reno 3 and New Reno 3 Series Model Spotted in TENAA Listing with Images and Key Specifications

On: December 13, 2019

Oppo is going to launch the Oppo Reno 3 series of smartphones on December 26. So far, we have got to know about the Oppo Reno 3 5G and the Oppo Reno 3 Pro 5G smartphones. Now, courtesy of TENAA, it looks as if there could be more devices coming up in the Oppo Reno 3 lineup.

Oppo Reno 3 series hits the TENAA certification website with a new model

In our earlier coverage, we speculated the Oppo Reno 3 Pro 5G to come with the model number PCRT00/PCRM00 and the Oppo Reno 3 Pro 4G variant to have the model number PCPM00/PCPT00. While the former assumption indeed turned out to be the case, the latter appears to be incorrect as the images of the device bearing the same model number are different when compared with those of the Oppo Reno 3 5G model, making us to believe that it could be the third device in the Oppo Reno 3 series of smartphones. It could very well be dubbed either the Oppo Reno 3Z or the Oppo Reno 3F. This, however, is not confirmed as of now, so we might as well take it with a pinch of salt.

Oppo Reno 3 5G specifications and live shots

Coming to the Oppo Reno 3, the device will come with the model number PDCT00/PDCM00. As opposed to the Oppo Reno 3 Pro 5G which has a single punch-hole camera display, the Oppo Reno 3 will feature a waterdrop notch display instead. The power button is on the right side of the device whereas the volume buttons are on the left side.

Oppo Reno 3F/3Z specifications

Coming to the Oppo Reno 3F/3Z, the device also has a waterdrop notch at the top. At the back, we can once again see a quad rear camera setup, but the LED flash right outside the camera module this time around. Plus, even if not too big of a difference, the Oppo logo also sits on the bottom left side of the device’s rear, exactly opposite to that of the other two devices.

Coming to the specifications, the Oppo Reno 3F/3Z will feature a 6.4-inches display, a 3,935mAh battery, and will measure 160.2×73.3×7.9(mm).

Oppo PDBM00 with a triple rear camera gets the TENAA certification

In another turn of events, a new Oppo smartphone with the model number Oppo PDBM00  has also appeared on the TENAA certification website.

As seen in the image, the Oppo PDBM00 has a rear-mounted unit fingerprint scanner. As far as the specifications of the device are concerned, the PDMB00 will feature a 6.55-inches display, a 4,230mAh battery, and will measure 163.9×75.5×8.3(mm). We will get a triple rear camera at the back. At the front, we can see a waterdrop notch display.

As of now, this is all we know about the upcoming Oppo Reno 3 series of smartphones, but we are sure to receive more information in the coming days.

Comments

Leave a comment

Your email address will not be published. Required fields are marked *